Lampworking Glass Supplies

 Many people just love to make their own works of art like etching lampworks with lampwork beads. Once you have your lampworking glass supplies, it becomes easier to start. Anyways, learn how to make lampwork beads through the article. 

How to Make Lampwork Beads

Making lampwork beads is actually a form of ‘glassblowing’, though in this case there is no actual working of the glass by ‘blowing’. As it is unlikely that you will have the tools to get started just lying around the garage, so here is a list of what you will need to acquire to get started:

* Torch and gas hoses
* Fuel tank(s) (either MAPP gas or propane/oxygen set- this choice will depend on your torch)
* Kiln or annealing oven
* Mandrels
* Bead release
* Glass rod
* Shaping tools (graphite and brass implements work best as they will not melt)
* Long nose pliers (for stringer work)

The process is simple in theory; one simply heats the glass rod at the edges of the torch flame, and slowly works towards the center of the flame until the glass is nearly molten and applies it to a mandrel (this is a long, steel rod) that has been treated with bead release (otherwise the bead would be permanently melted to the mandrel upon cooling). The mandrel is rotated to collect evenly distribute glass from the rod. When the desired size and colors are achieved, the beadmaker can add decorative elements through the addition of ground up glass or stringer (more on this later). When the bead is finished, it is allowed to cool to the point where it is no longer glowing, and placed in the kiln or annealing oven to cool very slowly. The annealing process is very important as it removes stresses that working molten glass causes in your beads. Skipping the annealing process will result in extremely fragile beads that break under the slightest pressure. Once the annealing process is finished, a simple cleaning of the beads will make them ready for artisan use.

Stringing- the process of creating glass strings by pulling molten glass with a pair of pliers to create a thin strand of glass.

Remember to be extremely careful throughout this whole process, as you will be working glass at extremely high temperatures, so be sure to use glass rods of adequate lengths- at least four inches between your hand and the heated end of the rod should keep you safe, though more length is always recommended. Also, keep in mind that hot glass looks like cold glass, so be mindful of where you place the glass rods you have been working.

Want to know more about Lampwork Beads?
Check us out at: http://www.lampwork-beads.org!

Article Source: http://EzineArticles.com/?expert=Henry_Heeney

Visit here to find out more of discounted glass supplies. And click here if you want to find tips on glass polishing and supplies.

Complete Lampwork Set up Available

Complete lampworking set-up for both soft glass and Borosilicate. Includes the following and more, all in excellent, gently used condition: EQUIPMENT: Nortel Red Max torch with top-mount [...]

Daily Musings from a Lampworking Wannabe! …

I have redirected my polymer clay doll blog to this glass blog because that is where my interest is now. I no longer make polymer clay dolls, I just don’t have the interest anymore. 

:Inspiration is Everywhere – Little Joys

This book was inspired by the unique ring that Finlay received for her engagement which features glass mosaic tiles from a famous church turned mosque now a museum…something so unique and "a [...]

How To Blow Glass – Glass Blowing Supplies

Also, I absolutely love encasing with boro, it is so much more pleasant than encasing with soft glass. If I wouldn’t miss the colors of soft glass, I probably would stick with boro [...]

Technorati Tags: lampworking glass supplies, stained glass lamp supplies